Email: info@samspoultry.co.uk
Telephone: 0l732 833635
These feeders are made up of 3 parts; the base, tube and lid. The tube twists and locks into the base. The handle goes through a slot in the lid which keeps the lid on tight. The tube has an anti waste grid attached. A good all round feeder for many types of poultry.
This trough has anti scratch bars which can be removed for easy cleaning. The anti scratch bars prevents the birds from scratching feed out and there saves money in wasted feed.
This trough is 50cm long and 8cm wide.
This trough has anti scratch bars which can be removed for easy cleaning. The anti scratch bars prevents the birds from scratching feed out and there saves money in wasted feed. Good with waterfowl as they don't rust.
This trough is 50cm long and 15.5cm wide.
This trough has anti scratch bars which can be removed for easy cleaning. The anti scratch bars prevents the birds from scratching feed out and there saves money in wasted feed. Good with waterfowl as they don't rust.
This trough is 100cm long and 15.5cm wide.
This trough is supplied in 2 pieces which lock together to form the full length of the trough.
This is well made heavy duty feeder with a capacity of 2.5kg. The tube twist locks into the base making it easy to remove and clean. It also has anti-waste fins to reduce feed wastage.There is a handle built into the tube so it can be hung if not using the legs. The legs raise the feeder approx 2.5 inches (6.5cm) off the ground meaning earth and bedding isn't scratched into the feed.
The same as above but with a rain hat. This fits on tightly to stop the feed getting wet and the wind blowing it off. The handle can't be used with the rain hat on. The lid shown in the picture above is also included.
A well made heavy duty feeder, made up of the removable lid, base, tube and 4 green push fit legs. The tube with anti-waste grid twist locks into the base. This allows it to be removed for easy cleaning. There is a handle attached to the tube so it can be hung. The legs raise the feeder approx 2.5 inches (6.5cm) off the ground meaning earth and bedding isn't scratched into the feed.
The same as above but with a rain hat which is needed if the feeder is going to be kept outside.The handle attached can only be used without the rain hat.
This feeder is made up of 3 parts; the base, tube with built in anti-waste grid and the lid. The anti waste grid prevents feed wastage as it stops hen scratching the feed out. Holds 12kg of food which is over half a sack. Suitable for all types of poultry.
This feeder also has slots in the bottom to allow 4 legs to be attached. These will raise the feeder by 2.5 inches which stops birds scratching earth/bedding into the feed. These cost £2 for the 4 legs and are in the 'Feeder and Drinker Sundries' section.
This is the feeder above along with a rainhat which stops the feed from getting wet.
Also included in the price is the push fit legs described above.
The Emperor Feeder is made from a durable UV stabilised recycled Polymer and has a capacity of 70 ltr (approx. 55kg). Its design allows feed to flow smoothly without clogging and uses a unique rainwater capture system. The feed dispenser is made form robust Glass Filled Nylon 6 and is resistant to badger attack and UV damage. Suitable for use in pens, open woodland and moorland locations.
You are viewing the text version of this site.
To view the full version please install the Adobe Flash Player and ensure your web browser has JavaScript enabled.
Need help? check the requirements page.